Team & Operators
Invite teammates to answer live chats, and run the account itself — per-website access, section permissions, seats, renaming, handing ownership over, and switching between accounts.
Invite teammates to answer live chats with you. When you invite an operator you choose how far they reach: the websites you pick — and, on each of those, only the dashboard sections you tick — or Everything in this account (step 3 below). Billing and your own account settings stay invisible to them either way, and so do the websites you didn't share when the reach is per website.
Operators log into the same dashboard with their own account — no shared passwords — and removing someone takes one click. One person can be an operator for several different owners at once, and can own websites of their own on the same account.
A second kind of member, the partner, is for the person or agency who sets your site up for you. It works differently from an operator and has its own section, Partners.
Seats and plans
Live Agent — and therefore operator seats — comes with some plans and not others. Which plans include it, and how many seats each gives per website, is in the Live Agent plan table.
A few things to know about how seats are counted:
- You (the owner) are not a seat. Seats describe the invited operators you add. How many you can bring in per website depends on your plan.
- Seats are counted per website. A seat is used by every invited teammate who can already answer chats on that website and by every pending invitation that will let someone answer there. Sharing three sites with one person uses one seat on each of those three sites. An account-wide teammate uses a seat on every website in the account — and so does a pending account-wide invitation, even though neither of them names a single website.
- Operators don't cost extra. Seats come with your plan, and the operator's account is free — they don't need their own subscription.
- The Team screen shows where you stand. Under Operators & team invites, for the website selected in the sidebar, the line reads, for example, "2 of 10 operator seats used on Acme — 8 free. Includes 1 pending invite." A pending invite holds its seat until it is accepted, withdrawn or expires. The figure is read from our server again after every invite, withdrawal, removal or change of access, and after an invite or change that is refused for lack of a seat. On a plan that includes Live Agent but no seats for invited teammates (a partner's demo site is one), the line says so, and the invite form closes that website, and any website with no free seat, with the reason beside it.
Inviting an operator (owner)
- Go to Dashboard → Team. This section is visible to the account owner only.
- Click Invite teammate and enter the teammate's email address.
- Choose What they can reach. This is the first choice in the form, and there are two answers:
- Only certain websites — selected for you, and the one the rest of these steps describe.
- Everything in this account — every website the account holds, including websites you add later, with every section switched on. You can narrow the sections later with Edit; the narrower set then applies on each website. A line under the choice restates whichever answer is selected.
- Tick the websites they should work on. (If you only own one website, it's pre-ticked for you — unless its seats are already full.) These boxes belong to Only certain websites; picking Everything in this account hides them.
- Under each ticked website, tick the sections they may see on that site (see below). A new invite starts with only Leads pre-checked — everything else is off until you turn it on. An account-wide invite skips this step: every section is on for them, on every website.
- Send invite. The teammate gets an email with an accept link. It names who invited them: your first and last name when your account has one that can be shown, your confirmed email address and your account's name (at the top of Team), for example "Jane Doe (jane@acme.com) from Acme invited you". A part that cannot be shown is left out: the address until it is confirmed, and the account's name unless it uses only letters, spaces and simple punctuation (no digits, web addresses, mixed alphabets or our product name); a default name made for an earlier owner is never shown. If nothing can be shown, the email just says they've been invited. The email does not list the sections you granted; the accept page does.
The invite link is valid for 72 hours, works once, and is address-bound — only an account signed in with that exact email address can accept it. If it expires, just send a new one.
If that address is on our do-not-send list, the dashboard says so: earlier mail to it bounced or was marked as spam, and sending the invite again won't help. The invitation is still created and waits under Pending invites: Revoke it there and invite a different address.
What you can share, per website
Live Chat comes with operator access — answering conversations is what operator access is for, so it's not a checkbox. On top of that, six sections can be granted individually, matching your dashboard's sidebar:
| Section | What the operator can do with it |
|---|---|
| Leads | View the leads captured on the website, and move one along the pipeline by changing its status. Deleting leads, in bulk or singly, stays with the owner. See Capturing Leads. |
| Knowledge Base | View crawled pages and uploaded files (read-only). See Adding Content. |
| Analytics | View conversation analytics (read-only). The Export and Conversations tabs, plan-usage/quota views and the cost figures on the ROI tab stay owner-only. See Website Analytics. |
| Integrations | View the integrations and their status (read-only) — credentials and secrets are stripped out, the side panel shows no settings, there is no Available tab, and no writes, config, or connecting. See Integrations. |
| AI Templates | View and edit the agent's template selection and custom prompt. See AI Templates. |
| Chat Configuration | View and edit the widget's appearance and welcome message. See Customizing the chat widget. |
Anything you don't tick simply doesn't appear in that operator's dashboard for that website — the section is hidden and the underlying data is blocked, not just greyed out. You can give different operators different sections, and give the same operator different sections on different websites.
Kept by the owner, whatever the plan: changing plans / billing, deleting or creating websites, configuring Live Agent itself (the enable switch, working hours, and transcript settings), the Assistant (automatic lead follow-ups and appointment reminders — see AI Assistant), and Channels stay owner-only — regardless of which sections you tick. An operator who lands on one of those pages is told plainly that it's managed by the website owner.
API keys and connected AI apps are not a section you can share either. The account owner creates and manages keys in Account → API keys and AI apps, and an operator role does not create keys for the account's websites.
This list is about operators. A partner has a fixed set of its own and no tickboxes; see Partners.
Email about a website they work on does reach them. An operator is emailed when a crawl of that website fails, when its webhooks keep failing, and when one of its integrations turns unhealthy or its credentials are about to expire — the operational problems whoever staffs the site is expected to act on. This follows the website, not the sections: everyone who can answer chats there is written to, whichever boxes you ticked. Anything carrying a plan or a price — a failed payment, or a warning that the account is using up its monthly allowance — goes to you alone.
If you're out of seats or on the wrong plan
If you're on a plan that doesn't include Live Agent, or a website has no free seat left, the invite shows a clear notice (for a full seat: "Operator seat limit reached for {site}. Remove an operator or upgrade your plan.") with an Upgrade shortcut where relevant. Nothing is sent until it fits. On a website whose plan has no operator seats at all, such as a partner's demo site, nobody can be invited to it, and an invitation for the whole account is refused with a notice naming that website; invite for the other websites only.
Accepting an invite (operator)
- Open the link from the invitation email. It lands on a public accept-invite page showing the address the invite was sent to, who invited you (their name, their confirmed email address and the account's name, each when it can be shown; see Send invite above), the websites you'll be able to answer chats on and the sections this invitation offers, shown under each website, or once for an account-wide invitation. If you already work on one of those websites in that account, your earlier access there stays as it is.
- Log in or create an account — it must use the same email address the invite was sent to. If you're already signed in under a different account, the page tells you so and offers to log out and switch before you accept. When you create the account from the invite page with that address, the invitation itself confirms the address and signs you in: there is no confirmation email, and you choose your password once. If you type a different address, the invitation cannot be accepted from that account and we send the usual confirmation email instead.
- Accept invitation — the shared websites appear in your dashboard right away, and you're dropped straight into Live Chat. If you came from Log in to accept or Create account on that page and signed in with the invited address and a password, this step happens by itself; if it does not go through (for example the team has no free seat), you stay signed in, and on the invitation page Accept invitation stays available and shows the reason. After signing in with Google, Accept invitation is a click.
An expired or already-used link shows "Invite invalid or expired" — ask the owner to send a fresh one. Signing in with an address the invite wasn't sent to is called out separately: "This invite was sent to a different email address, or it has expired."
What an operator can see and do
- Shared websites appear in the workspace switcher at the top of the left-hand navigation, alongside the websites you own yourself — when you have both, the list splits them into My workspaces and Shared with you. While a shared website is selected, the switcher's button carries a shared-with-you marker, so you can tell whether you're on your own site or someone else's.
- The sidebar on a shared website shows Live Chat, Workspaces, Account and Documentation — plus only the sections the owner granted you. Ungranted sections and owner-only items such as billing are hidden.
- On the Workspaces page, the sites shared with you appear in a separate Shared with you list — no billing, no plan controls, no danger zone, no embed snippet. Each row shows how far your access reaches and which sections are shared with you, with an Open Live Chat button, and the list's note says their settings, billing and plan stay with their owner. Your working surface is Live Chat.
- Account is your own account — edit your name, change your password, and set up two-factor auth. (The light/dark theme choice lives in the account menu at the foot of the sidebar, next to the language choice; on a phone, it's in the menu.)
- The Live Chat inbox works in full: replying, resolving and reopening, attachments, search and visitor info, as described in Live Agent. Saved replies are a shared team asset: operators can create, edit and delete them for the website, so the owner doesn't have to set them up on your behalf (see Saved replies).
- Personal Live Chat settings (Live Chat → Settings) are yours alone: Desktop notifications, Sound on new message, Translate conversations, and the identity controls below. The owner's site configuration isn't shown to you.
Operator identity — what visitors see
The "Show my name to visitors" toggle and the optional display name are personal: owner and operators each set their own, saved live under Live Chat → Settings. With the toggle off, visitors see your display name, or the widget's generic "Operator" label if you have no display name, instead of your real name — handy for privacy or a consistent front. This only affects what visitors see: in the inbox, in assignments and in analytics, teammates and the owner see each other's real names. A real name that holds anything but letters, spaces, apostrophes, hyphens and periods, or looks like an email or web address, is never shown to visitors — they see the generic label instead.
Working together on the inbox
With more than one person answering, the inbox keeps you out of each other's way:
- Mine · Unassigned · All tabs filter conversations by who they're assigned to, so you can grab from the unassigned pile or focus on your own.
- Assign to me claims a conversation explicitly — and simply replying to an unassigned conversation assigns it to you automatically.
- The owner can reassign a conversation to another teammate from the conversation menu (operators get Assign to me / Unassign for the open thread instead).
- A "… viewing" badge appears on a conversation when a teammate has it open, so two people don't answer the same visitor at once. The badge clears on its own once they move on.
Assigned conversations carry a small chip in the list showing who's on them. Live Chat → Analytics breaks response times and handled conversations down per agent, so you can see how the team is doing — that sub-tab is owner-only; an invited operator sees Inbox and Settings, and no Analytics tab.
Managing and removing operators (owner)
The Operators & team invites section lists current members and pending invites:
- Edit — open the inline editor to change which websites and which sections a member has. Their current access is pre-checked so you can see what they have before you change it. A member with account-wide access is marked as such: the editor shows one set of sections for them, and ticking sites here limits them to those. Save applies immediately. If the change takes a website away, the live updates the member already has open for it stop at once — or, if our server fails at that instant, the next time their browser reconnects.
- Revoke (a pending invite) / Remove (an accepted member) — access ends immediately and the seat is freed for someone else. Removing a member also ends the live updates they already have open, at once — or, if our server fails at that instant, the next time their browser reconnects.
Partners
A partner is a second kind of member, for the person or agency who sets your site up for you. A partner takes no operator seat and cannot answer live chats. A partner works on the setup of your site, not on your conversations.
How a partner joins. Not from Invite teammate: the partner sends you a partner invitation by email, and its page lists what the partner will be able to do before you accept. A partner needs two-factor sign-in turned on in their own account, and an account can have up to three partners at a time. Because a partner takes no seat, joining does not use up one of your plan's operator seats.
What a partner can do. The set is fixed, not ticked by you. On each website it is limited by that website's plan, as your own access is: a setting that belongs to a feature the plan does not include stays closed to the partner, and a website with no plan yet, such as one a partner invited you to set up and you have not paid for, keeps the settings that need a plan feature closed. The set:
- Analytics — view conversation analytics, read-only, with the same limits as for an operator.
- Leads — view the leads captured on the website and move one along the pipeline. Deleting leads stays with you.
- Knowledge Base — view, add, edit and remove its content.
- AI Templates — view and edit the agent's template selection and custom prompt.
- Chat Configuration — view and edit the widget's appearance and welcome message.
- Integrations — set up the simple ones, such as where captured leads are sent: a webhook address, a lead email address or a form action. A partner can replace such an address but is not shown what is saved there; once an Authorization header is saved for a webhook address, only the owner can change or remove that address.
- Live Agent — switch it on or off and set its working hours, on a plan that includes Live Agent; see Enable Live Agent.
- Install code — see the code that puts the chat widget on your site.
What stays with you. Deleting the site or the account, billing, plan, team, export and channel connections stay with you. A partner cannot change the Assistant, transcript storage, the transcript email, voice calls or visitor attachments, or connect Calendar and Slack. A partner may not see, create or change a Custom Action either, and may not send a test webhook, retry a failed delivery or read a webhook's recent delivery failures. Where the Integrations screen shows one of these to a partner, a note tells the partner to ask the workspace owner. A partner may not use Test with my file or the live price example in the template editor of Document Analysis either: only you, the owner, can. Channels, Assistant and Team do not appear in a partner's sidebar.
In your Team list. A partner appears in the member list under Team, labelled Partner, with the sections it holds. Its access is fixed: the row offers Remove and no Edit, and the ownership handover is not offered for a partner.
Removing a partner. Use Remove on the partner's row. Access ends immediately, and the notice tells you how many connections the partner last set up. Removing a partner does not switch those connections off: a webhook or lead email address the partner set keeps working as saved until you change it, so open Integrations afterwards and check where each one sends data. A connection a partner set up is marked on its card, and the mark changes once the partner has been removed. The mark follows whoever last changed where the connection sends data or what credential it holds, so changing it yourself clears it.
The account and its name
Your websites, your subscription and your team belong to one account. It is created when you sign up and named after your first name (Dana's Organization) or, when your account has no first name, after the first part of your email address. That does the job until you're working with people who belong to several accounts and need to tell them apart.
Rename it under Dashboard → Team → Account name → Rename. Up to 80 characters. Spaces around the name are trimmed rather than refused; a name that would end up blank — including one made only of zero-width characters — is turned down with a message instead of being saved. The change takes effect immediately and is written to the account's audit history.
Only the owner can rename the account: the Team screen isn't shown to operators. Renaming changes the name only: access, websites and billing stay as they were. Members of the account see the new name in their own Account → Accounts you belong to list.
Handing the account over
Ownership can move to somebody else. It is also the only way to leave an account you own and keep it running for the people in it. Closing your own account is the other way out, and it ends the account instead — see Closing your whole account.
The person has to be a member of the account already — invite them and let them accept first, then hand over. On their row in Team, the ownership control opens a confirmation naming what changes. There is no undo: afterwards only the new owner can hand it back. A partner is not offered the handover.
What goes with it. The account itself, every website in it, its plan and billing, and the whole team. The new owner takes over the moment you confirm.
API keys stay with the account. The account's API keys are not revoked and keep working. From the handover they act as the new owner, and the new owner is emailed the list of keys that someone else created, to review. Connected AI apps belong to the person who connected them: a connection you made in this account is ended at the handover, so it stops reaching the websites that moved, and you can connect it again from an account you own. See Keys belong to the account.
What you keep. You stay on the team with access to every website in the account, and every section on each — the widest reach an invited teammate has. What you give up is ownership: deleting a website, exporting it, plan and billing, and inviting or removing teammates all become the new owner's.
Where you land. At the same moment you're moved into an account of your own — a new, empty one, or the personal account you already have (for example, when this account was handed to you and you're handing it back) — and that's the one you're working in afterwards. So an empty-looking dashboard straight after a handover is expected — you're standing in your own account, and you reach the one you handed over the way a teammate reaches it, through the workspace switcher.
Six cases are refused rather than left to surprise you: handing the account to someone who has since deleted their own account, to someone whose own account is scheduled to close, handing it over while your own account is scheduled to close (cancel that closure first), handing it over while the account has a partner application under review or a partnership, current or suspended (write to support@novixagent.ai and we end the partnership first, as described in the Partner Program), handing it over when your staying on as an operator of every website would take a website past its plan's operator seats, and handing it over while our support staff are signed in as you to help with something. The last stays yours to do.
Accounts you belong to
Account → Accounts you belong to lists the accounts you're part of: your own, and the ones you were invited into. Each row shows how far your access reaches there: the account's websites, or a count of the ones shared with you.
You work in one account at a time. The one marked Working here is what the dashboard shows you — its websites, its billing, its team. Until you choose another, you're in the account you got when you signed up.
Work here appears on accounts you own and aren't currently in, which in practice means one was handed to you. Switching reloads the dashboard, because its screens belong to the account you're in. Accounts you were invited into don't offer this and don't need it: websites shared with you appear in the workspace switcher whichever account you're working in.
Leave ends your own membership. Access stops immediately, and the live updates you already have open stop at once — or, if our server fails at that instant, the next time your browser reconnects. The owner can invite you again, but the websites and sections you had aren't restored — a new invitation is a fresh decision. On your own accounts the row reads Transfer ownership to leave instead of offering the button, because an account can't be left without an owner. If the owner of an account you were invited into closes their own account, your place in it ends with it and its websites leave your workspace switcher.
FAQ
Can an operator see billing or invoices? No. Billing, plan management and your account are not among the sections you can tick, so they stay with you whichever sections you tick. An operator only has their own account page (name, password, 2FA). That page can also show the API keys and AI apps card, which concerns only the websites that person owns.
What happens when I remove an operator or revoke an invite? Access ends immediately, and the live updates the person already has open stop at once — or, if our server fails at that instant, the next time their browser reconnects. Open dashboard sessions lose the shared website on their next action, and the seat is freed right away.
Does a pending invite use up a seat? Yes — from the moment it is sent, counted as Seats and plans describes. Revoking the invite frees its seats.
Can one person be an operator for several accounts? Yes. Invites from different owners land in the same operator account; each shared website shows up in the same workspace switcher, and the switcher's button marks the selected one as shared with you. That person can also own websites of their own on the same account.
Can an operator invite other operators? No — inviting, editing grants, and removing members is owner-only.
Can I give operators different access on different sites? Yes. With per-website reach you choose the sections independently for each site you share, and you can change them later from the member's Edit editor. A member invited with account-wide reach carries one set of sections across every website; ticking individual sites in that same editor limits them to those and turns their reach into a per-website one.
Do operators need to pay? No. Seats come with the owner's plan (how many per website is in the Live Agent plan table); the operator's account is free.
Can a teammate rename the account? No — renaming is the owner's, like the rest of the Team screen.
Can I move one website to a different account? No. A website stays with the account it was created in. Handing the account over is how its websites change hands.
I own two accounts now. How do I know which one I'm in? The row marked Working here under Account → Accounts you belong to. The websites, billing and team the dashboard shows as yours belong to that account, so switching is the way to work on the other one.
Can support hand my account over, or switch accounts, for me? No. When our staff are signed in as you to help with something, handing the account over, choosing which account you work in, and leaving an account are refused. Those stay yours.
What is the difference between an operator and a partner? An operator answers your visitors in Live Chat and takes one of your plan's seats. A partner works on the setup, answers no chats and takes no seat. See Partners.
Can a partner see my billing or pay for me? No. Billing, plan, team, export and deleting the site or the account stay with you, so a partner has no way to open them or to pay for you.
Can I change what a partner can reach? No. A partner's access is fixed: you keep it as it is or remove the partner, and removal takes effect immediately.
What happens to what a partner set up if I remove them? It stays as saved. Removal tells you how many connections the partner last set up; check under Integrations where each one sends data. See Removing a partner.
Can a partner use Custom Actions or send a test webhook? No. Both stay with you, like connecting Calendar and Slack. See Partners.
Need more seats or a role setup we don't cover yet? Email support@novixagent.ai.